Exchanging Preset Stations - Yamaha HTR-5150 Owner's Manual

Notes
• You can manually replace a preset station with another FM or AM station by simply following the procedure in the section "To
store stations" on page 31.
• Even if the number of received stations is not enough to be stored up to E8, the search is automatically ended after searching all
frequencies.
• With this function, only FM stations with sufficient signal strength are automatically stored. If the station you want to store is weak
in signal strength, tune in to it manually in monaural sound and store it by following the procedure in the section "To store sta-
tions" on page 31.

EXCHANGING PRESET STATIONS

You can exchange the assignment of two preset stations with each other as shown below.
Example
If you want to change the preset station from "E1" to "A5", or vice versa.
1
Recall preset station "E1" by following the procedure in
the section "To recall a preset station" on page 32.
2
Press EDIT.
Front Panel
34
2,4
3
4
Flashes
Next, recall preset station "A5" by following the same
procedure as that in step 1.
Flashes
Press EDIT once more.
Front Panel
Shows the exchange of
stations has been completed.