Rebuild Command
You can use rebuild commands to rebuild a RAID1 array when it is critical or broken.
Syntax
rebuild {array_id} {device_id}
rebuild {array_id} {start|stop}
Table7: Properties for Rebuild Command
The following table lists and describes the properties for the rebuild commands.
Cmd
Property Name
rebuild
{device_id}{array_id}
rebuild
{array_id} {start|stop}
Rebuild array
rebuild {array_id} {device_id}
This command allows you to add the specified disk to a broken array and rebuild it.
Example
HPT CLI> rebuild 1 1/E1/1
This command instructs the controller to add the disk "1/E1/1" to rebuild the array "1". You can use the query commands
first to verify the device ID and the array ID information before the rebuild command.
Description
This command allows you to add the specified disk to a broken
array and rebuild it.
This command allows you to start or stop the rebuilding process
on the specified array.
61