Table of Contents
Advertisement
Disable Enclosure Security
Note:
This setting can only be disabled if the target AIC/ enclosure is not hosting any secured disks with the "Legacy" status
or secured arrays.
Syntax
secure {enclosure id} disable
The command is used to disable Enclosure Security.
Example
HPT CLI> secure 1/E1 disable
The command is used to disable enclosure security for enclosure 1/E1.
Note:
You can check if disable Enclosure Security is in effect with the command: query enclosures. The secure status
of enable Enclosure Security is Yes, and the secure status of disable Enclosure Security is No.
113
Advertisement
Table of Contents
