Create an Array
An array is a collection of physical disks that will be one virtual disk by your Operating System (OS). You need to
follow the steps below to create an array.
1. Open the WebGUI.
2. Select the proper AIC from the drop down on the top left.
3. Click the Logical tab.
4. Click Create Array.
Example screenshot
Array Creation Profile Options
Array Type
This drop-down menu allows you to specify the RAID level.
RAID0
-
-
RAID1
RAID10
-
Note:
The newly accessed disks are not used to create a RAID array, and they are defaulted to single disks.
Array Name:
The name that will be displayed in Logical Device
-
Information (Default: RAID_<level>_<array number>)
Secure:
Be able to use the disk/array's SED capabilities. (for more information, see SafeStorage).
19