Table of Contents
Advertisement
Enable collecting system logs
(default: Disabled)
You can set it to enabled to collect system logs at any time. The collected system logs are stored on the
C:/Windows/hpt_diagdriver. The maximum capacity of the collected system log is 800MB, and parts exceeding 800MB
will be overwritten forward.
Temperature Unit
(default: °F)
The default temperature unit is Fahrenheit, you can change it to Celsius.
Note:
The temperature unit function is only supported by windows.
Password Setting
Changing your HRM (HighPoint RAID Management) password
Under Password Setting, type your new password, confirm it, then click Submit.
Recovering your HRM (HighPoint RAID Management) password
If you forget your password, you can delete the file hptuser.dat. Then, restart the computer and open the WebGUI to set a
new password.
For Windows Users:
1.
Open File Explorer.
2.
Navigate to C:/Windows/
3.
Delete hptuser.dat.
4.
Reboot.
For Linux Users:
If you forget your password, you can't recover your password, you can only uninstall the HighPoint RAID Management
software and then reinstall the HighPoint RAID Management software.
30
Advertisement
Table of Contents
