Pairing Your Bike Light With Your Edge 830 Or 1030; Customizing Headlight Settings With Your Edge Device - Garmin VARIA RCT715 Owner's Manual

Pairing Your Bike Light with Your Edge 830 or 1030

1 Bring the Edge device within range (1 m) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other ANT+
2 Turn on the Edge device.
3 Select > Sensors > Add Sensor > Search All.
4 While the headlight is turned off, hold the Varia device key for 2 seconds to enter pairing mode.
The status LED flashes purple, and the headlight turns on. The device is in pairing mode for 5 minutes or
until you press the device key.
5 Select your sensor.
When the sensor is paired with your Edge device, the status icon appears solid on the connections screen.
Viewing the Connections Screen
The connections screen displays the status of the GPS, ANT+ sensors, and wireless connections.
From the home screen or a data screen, swipe down from the top of the screen.
The connections screen appears. A flashing icon means the device is searching.

Customizing Headlight Settings with Your Edge Device

Before you can customize Varia device settings with your Edge device, you must pair the devices
Bike Light with Your Edge 830 or 1030, page
1 From the Sensors menu, select Lights.
2 Select an option:
• Select Enable to enable the light network.
• Select Network Options > Light Mode to set the light intensity mode for all lights in your network
Mode Settings, page
• Select Network Options > Light Beam Activated to turn on the headlight automatically when the timer
starts or when the Edge device turns on.
• Select Network Options > Test Lights to check that each light in your network is set up correctly
the Light Network, page
• Select Network Options > Auto Beam Adjustment to adjust the headlight intensity automatically based on
the rate of speed. A high intensity is used at high speeds, and a low intensity is used at low speeds.
• Select a light to view device information and customize each light in your network
Settings, page 8).
Device Settings
7).
8).
8).
® bike lights while pairing.
(Pairing Your
(Light
(Testing
(Light Network
7