Table of Contents
Advertisement
Using Cycling Dynamics
Before you can use cycling dynamics, you must pair the power meter with your device using ANT+ technology
(Pairing Your Wireless Sensors,
NOTE: Recording cycling dynamics uses additional device memory.
1 Go for a ride.
2 Scroll to the cycling dynamics screen to view your power phase data
offset
.
3 If necessary, select Data Fields to change a data field
NOTE: The two data fields at the bottom of the screen
You can send the ride to the Garmin Connect app to view additional cycling dynamics data
Garmin Connect,
page 48).
Power Phase Data
Power phase is the pedal stroke region (between the start crank angle and the end crank angle) where you
produce positive power.
Platform Center Offset
Platform center offset is the location on the pedal platform where you apply force.
Customizing Cycling Dynamics Features
Before you can customize Rally features, you must pair a Rally power meter with your device.
1 Select
> Sensors.
2 Select the Rally power meter.
3 Select Sensor Details > Cycling Dynamics.
4 Select an option.
5 If necessary, select the toggle switches to turn on or off torque efficiency, pedal smoothness, and cycling
dynamics.
Updating the Rally System Software Using the Edge Bike Computer
Before you can update the software, you must pair your Edge bike computer with your Rally system.
1 Send your ride data to your Garmin Connect account
Garmin Connect automatically looks for software updates and sends them to your Edge bike computer.
2 Bring your Edge bike computer within range (3 m) of the power meters.
3 Rotate the crank arm a few times. The Edge bike computer prompts you to install all pending software
updates.
4 Follow the on-screen instructions.
Wireless Sensors
page 43).
, total power
(Adding a Data Screen,
page 52).
can be customized.
(Sending Your Ride to Garmin Connect,
, and platform center
(Sending Your Ride to
page 48).
45
Advertisement
Table of Contents
