Table of Contents
Advertisement
Pull the tab on upholstered lining
#
and position it on the support surface.
Upholstered lining
1
remains folded up.
Attach the ISOFIX/LATCH child restraint sys-
#
tem to both securing rings
2
in the vehicle.
To close, fold upholstered lining
1
#
Lift the tab from the support surface and slide
#
it back into the upholstery slot between the
seat backrest and seat cushion. Close the
upholstery flap.
1
upwards
Vehicles with standard seats
upwards.
1
LATCH-type (ISOFIX) securing rings
Remove and stow away covers 1.
#
Attach the ISOFIX/LATCH child restraint sys-
#
tem to both securing rings in the vehicle.
After removing the child seat, reattach covers
#
1.
Children in the vehicle – Securing the child restraint system
Fastening a Top Tether
& WARNING Risk of injury or death if the
rear seat backrests are not locked after
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests after
#
installing Top Tether belts.
Observe the lock verification indicator.
#
If the rear seat backrest is not engaged and
locked in place, the red lock verification indicator
will be visible.
73
Advertisement
Table of Contents
