Table of Contents
Advertisement
ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch
6 to automatically add a PVID of 2 to all data received from the computer. This step ensures
that the data from the computer on port 6 can be seen only by other members of VLAN group
2. You can assign only one PVID to a port.
Use Browser-Based Access to Assign a PVID to a Port
To assign a PVID to a port:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Browser
on page 14.
The login window opens.
4.
Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5.
Select VLAN > 802.1Q > Advanced > Port PVID.
The Port PVID page displays.
6.
Select the port.
7.
Enter the PVID.
8.
Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Assign a PVID to a Port
To assign a PVID to a port:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed switches that it discovers
on the local network.
3.
Select the switch.
If you do not see the switch, click the REFRESH button.
Use VLANS for Traffic Segmentation
51
Access the Switch Using a Web
Advertisement
Table of Contents
