Roland D-50 Owner's Manual page 56

TONE PARAMETERS
24
Pitch 0
Point 1
Point 3
Point 2
ut 4 Sus L
T2 73 Time
: Point 4
Point 0
(Key Off
End tL
(Key On)
This is based on the pitch set with WG
Pitch Coarse and Fine for each Partial.
@Time 1
This sets the time needed from point 0 (the moment the key is
pressed) to point 1, 0 to 50 are valid.
@Level 0
This sets the pitch created the moment a key is pressed from -50
to +50.
@Time 2 RG
This sets the time needed from point 1 to point 2.0 to 50 are
valid.
@Level 1
This sets the pitch of the point 1 from -50 to +50,
@Time 3
This sets the time needed from point 2 to point 3.0 to 50 are
valid,
@loevel 2
This sets the pitch of the point 2 from -50 to +50.
@ Sustain Level
This sets the pitch of point 3 from -50 to +50.
@Time 4
This. sets the time needed from the moment the key is released
to point 4. 0 to 50 are valid.
@End Level
This sets the pitch of point 4 from --50 to +50.