Roland D-50 Owner's Manual page 42

EDITING
The following explains how each button works, The Menu Display
and parameter which each button leads to are shown in the supplied
Edit Map. Piease thoroughly study the map.
@ Selector Buttons
These can be used to select one of the parameters shown in the
Display. Simply push the relevant Selector Button, and its current
value will flash in the Display.
@Scroll Buttons
These buttons can be used to scroll through more parameters in
the same menu group.
Pushing the far-right Scroll Button calls the next parameter
group, and the left Scroll Button returns to the previous parameter
group.
@Exit Button ;
This button can be used to leave the parameter currently called
and go back to its Menu Display. To go back to the Play Mode
Display, hold down the Shift Key while pressing the Exit Button.
{CHANGING PARTIAL DISPLAYS]
10
While editing a parameter of one Partial, you can call the Display
of the same parameter for a different Partial.
The Patch Buttons 1 to 4 can select Partials as shown below.
eo covet eSiee a Che S oo C5055
con om = wom se ee
o | | coocoace
=
=
emer
me 9 ow 9
Coe. co | co
fo te = om sor one oe
=. ca ca co es oo lo lee ca co co
Low
Upper's Partial 2
Upper's Partial 1
er's Partial 2
Lower's Partial 1