Roland D-50 Owner's Manual page 75

TONE PARAMETERS
@LFO Depth ERita x] OEY
This sets the depth of a growl effect from 0 to 100. Higher values
deepen the effect.
Positive Phase
Negative Phase
@ Aftertouch Range Ring |
This sets the sensitivity of the aftertouch that controls the cutoff
point from -7 to +7."—" values lower the cutoff point by
stronger Aftertouch, and "+" values raise it,
h. TVA
[Display 35]
I-ii Us Str@i 11it Part-1 TVA
Levl 56 Velo~5a BP >CP Bly1-12
Co a
Bias range —_ Bias level
Volume Adjustment
Level Velocity Range
@ Love
This sets the volume of a Partial from 0 to 100.
*Higher values may cause sound distortion. If so, lower the value.
*Even when the Level is set to zero here, tha sound may not be
completely muted if the TVA ENV curve is high.
@Velocity Rnage
This sets the sensitivity of the velocity that controls the volume
of the sound. —50 to +50 are valid."—" values lower the level
by harder playing, and "+" values raise the level by harder
playing. .
43