Basic Recording
Adjusting the LCD during PLAY
•X, You can adjust the LCD during playback.
_, The adjustment method is the same procedure as used in CAMERA mode. (see page 29)
IENGLISH
The Speaker works in PLAYER mode only.
• When you use the LCD monitor for playback, you can hear the recorded sound from the built-in Speaker.
If you do not want to hear the sound set SPEAKER to OFF in the menu.
1. Set the power switch to PLAYER mode.
2. Press the MENU ON/OFF button.
3. Turn the MENU DIAL to highlight SPEAKER.
4. Press the ENTER button to change the setting.
5. Press the MENU ON/OFF button to finish the SPEAKER setting.
•
If you dose the LCD monitor, both the LCD and speaker are switched off.
•
If the speaker does not work properly, check these points;
-
Is the LCD monitor closed?
Is the volume adjusted to a low?
Is the SPEAKER set to OFF in the menu?
Volume Control
•X,Thevolumeof theSpeakeriscontrolled by movingtheZOOMlever(Volume Control)duringplayback.
/MENU)
SP STOP
LCD ADJUST
PHOTO SEARCH
AUDIO $EL .......
SOUND1
REC MODE ........
SP
DISPLAY
......
LCD
MENU
&