Learning A New Function - Yamaha DSP-A1092 Owner's Manual

LEARNING A NEW FUNCTION

1. Place this remote control unit and the other remote control unit
so that they face each other.
This remote control
unit
2. Press the LEARN button using the point of a mechanical pencil
etc.
CLEAR LEARN
* If there is no operation for about 30 seconds after the LEARN
button is pressed, the TRANSMIT/LEARN indicator flashes
rapidly and the current mode is canceled. If this occurs,
repeat this step.
Other remote
control unit
About 5–10 cm
(2–4 in.)
TRANSMIT
/LEARN
MACRO
Flashes slowly.
3. If necessary, select the memory area by using the A/B/C switch
on the side panel of the remote control unit.
4. Press the key on this remote control unit in which you will store
a new function.
Lights up.
* If a key which cannot learn another function is pressed, the
TRANSMIT/LEARN indicator flashes rapidly and the current
mode is canceled. If this occurs, repeat this step.
* If there is no operation for about 30 seconds after a key is
pressed, the TRANSMIT/LEARN indicator flashes rapidly and
the mode before you began learning operations is restored. If
this occurs, restart from step 2.
61