Saving Log Book; Loading Log Data (Load) - Yaesu FTDX-9000 Operation Manual

L B
OG OOK
Log data can be saved in the supplied Compact Flash (CF) card.
1. Referring to Figure 1 on page 23, press the
[ F7 ]( SAVE/LOAD ) key to move to the Save/Load
page.
2. Press the [ F5 ]( SAVE ) key to choose the "Save"
protocol.
3. Input the desired FILE NAME, and press the
[ F6 ]( GO ) key to save the data in the CF card.
Note: When the ERROR message "PLEASE CHECK
A DISK" is displayed at the right side of the MEM
CARD indication, please confirm that the CF card is
inserted correctly into its slot.
When memory data is saved in the CF card, any file
with the same name as the current file will be revised
(over-written), and the previous data will be deleted.
Please note.
You may load log data from a CF card into your FT 9000D (for example, an archive copy, or a log from a
different transceiver). Before starting, be sure the CF card containing the log data has been inserted into the CF
Card Slot.
1. Referring to Figure 1 on page 23, press the
[ F7 ]( LOAD ) key to engage the Save/Load mode.
2. Press the [ F5 ]( SAVE/LOAD ) key to engage the
LOAD protocol.
3. Use the [ F1 ]( ) and [ F2 ]( ) keys to select the
file you wish to upload to the transceiver, then
press the [ F6 ]( GO ) key to load the file.
Advice: When the ERROR message "PLEASE
CHECK A DISK" is displayed at the right side of the
MEM CARD indication, please confirm that the CF
card is inserted correctly into its slot.
When memory data is loaded from the CF card, the
current memories stored in the FT 9000D will be
over-written, and the previous data is erased. We
recommend that you save and download the current
memory data to the CF card, if you want to use it
again later.
Page 28
F
UNCTION
S L
AVING
L L
OADING OG
D
OG ATA
S
Advice: The user configuration protocol (CONFIG)
allows you to specify the file format that is used for
saving log data. The available formats are:
ADIF (International Log Format) .................... adi
CSV (Cursor-Limited Values) ........................ csv
TXT (Tab-Limited Values) ............................... txt
CABRILLO ......................................... cabrillolog
(International Log Format)
( LOAD )
D
ATA
S
FT 9000 TFT O
/L M
/L M
M