Log Book Previous-Qso Check (Check); Editing Log Book Entries - Yaesu FTDX-9000 Operation Manual

L
OG
IIt is possible to check the log in search for previous QSOs with a particular station. When a log entry of interest
is found, you may edit the information on that line, if you like.
1. Referring to the Figure 2 on page 23, enter the
desired callsign into the CALL field.
2. Press the [ F4 ]( CHECK ) key to show a list of any
previous QSOs with the specified station within
the current log. Any previous QSOs will appear
on a CHECK MODE list.
3. Use the [ F1 ]( ) , [ F2 ]( ) , [ F3 ]( ) , and [ F4 ]( )
keys to scroll through the data on the CHECK
MODE list.
Quick Point: In the Step 2, before doing a check for a duplicate QSO, a copy is made of the QSO record, and
you may then do editing of that record. Use the [ F1 ]( ) , [ F2 ]( ) , [ F3 ]( ) , and [ F4 ]( ) keys to select an item
from among CALL, RST, BAND, MODE and REM; when you press [ F5 ]( ONLY THIS ) , you'll copy only that item.
When you press [ F7 ]( EXIT ) , the TFT image changes to what you see on page ??; press [ ENTER ] on the
keyboard to do a duplicate check, and press [ ENTER ] once more to return to the log input page and copy the
data.
If you select a line of data using the [ F1 ](
[ F7 ]( ENTER ) will cause the TFT image to change to what you see on page ??, and you may now press the
[ ENTER ] key on the keyboard to do a duplicate check. Press [ ENTER ] once more to return to the log input page
and copy the data to that page (however, the NUMBER, RST, BAND, and MODE data will not be copied).
Previously-entered log data may be edited alter, if desired.
1. Referring to Figure 1 on page 23, press the
[ F1 ]( ) / [ F2 ]( ) key to select the log data to be
Editing.
2. Now you may ue the arrow keys on your keyboard
to move the highlighted area through the log.
3. Use the keyboard to change data within the cur-
rently-highlighted area.
4. Press the [ F4 ]( RECORD ) key when you are fin-
ished editing the entries you have worked on.
If you do not wish to save your changes, press
the [ F5 ]( UN-RECORD ) key instead.
Advice: Data may easily be deleted, if you make a
mistake, enter duplicate data accidentally, etc.
To erase data, use steps (1) and (2) to select the
data to be erased. Then press [ESC] on the keyboard;
the data will be deleted. Press [F4] (RECORD) to
return to the screen depicted on page ?? and end
this procedure.
FT 9000 TFT O
B P -QSO C
OOK REVIOUS
) and [ F2 ](
E L
DITING OG
M
L B
OG OOK
( CHECK )
HECK
P
) keys, pressing [ F6 ]( ALL SELECT ) followed by
B E
OOK NTRIES
F
UNCTION
-QSO C M
E M
Page 27