Memu Mode Configuration Changes - Yaesu FTDX-9000 Operation Manual

U
SING THE
When you want to change something in a menu mode setting, follow the procedure described below.
1. Press the [ MNU ] key momentarily.
The TFT will display the Menu page. Included on
this page will be the Menu Group, Menu Item
Name, Menu Item Number, and the current sta-
tus (setting) for each Menu item.
2. Use the Main Tuning Dial, or the the [ F6 ](
[ F7 ]( ) keys, to select the Menu item you wish to
work on.
3. Use the CLAR/VFO-B knob, or the [ F4 ]( ) / [ 5 ]( )
keys, to change the setting of the selected Menu
item.
4. Press the [ MNU ] key is pressed for 2 seconds to
save (within the transceiver) the new setting; the
menu screen will close, and you will then return to
the screen that was in use before entering the
menu mode.
If you press the [ MNU ] key momentarily to exit,
the new settings will not be saved, and you will
exit from the menu mode without retaining the new
configuration.
Page 44
M M
ENU ODE
M M C
ENU ODE ONFIGURATION
) /
C
HANGES
M M
1. First turn off the radio by pressing the front
panel [ POWER ] switch.
2. Now, turn on the radio while pressing the
[ MNU ] key. The menu mode will be reset, and
the factory default configurations will come
back.
FT 9000 TFT O
RESET
M