Using The Memory Channel List; About The Memory Channel List; Explanation Of The Function Keys On The Memory Channel List Screen - Yaesu FTDX-9000 Operation Manual

U
This is the screen which displays the transceiver's memory channels. On the list, the channel number, ID tag,
frequency, and operating mode are shown. The FT
that may be arrayed into up to six groups, and you can check the entire memory system's status by viewing this
screen.
E
XPLANATION OF THE
F2 LOAD
Press this key to load memory data previously
saved on the CF card to the transceiver.
F3 SAVE
Press this key to save the current memory data to
the CF card.
F5 MASK/RESTROKE
It is possible to erase the currently-selected
memory channel's data by pressing this key. If
you want to restore the erased memory data, press
this key again after erasing the memory.
FT 9000 TFT O
M
SING THE
A M
BOUT THE EMORY
F K
UNCTION EYS ON THE
M
C
EMORY
C L
HANNEL IST
9000 has an extensive memory system of 99 channels
DX
M C
EMORY
F6
Use this key to move the highlighted field on the
memory list downward.
F7
Use this key to move the highlighted field on the
memory list upward.
DISP DISPLAY
Press this key momentarily to move to the World
Clock page.
Press and hold this key in for two seconds to re-
vert to the Rotator Control page.
L
HANNEL
L S
HANNEL IST CREEN
Page 39
IST