Table of Contents
Advertisement
L
It is possible to check the log in search for previous QSOs with a particular station. When a log entry of interest is found,
you may edit the information on that line, if you like.
1. Referring to the Figure
sired callsign into the "CALL" field.
2. Press the [ F4 ( CHECK )] key to show a list of any pre-
vious QSOs with the specified station within the cur-
rent log. Any previous QSOs will appear on a
"CHECK MODE" list.
3. Use the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , and [ F4 ( )] keys
to scroll through the data on the "CHECK MODE"
list.
Quick Point: In the Step 2 above, before doing a check for a duplicate QSO, a copy is made of the QSO record, and you
may then do editing of that record. Use the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , and [ F4 ( )] keys to select an item from among
"CALL," "RST," "BAND," "MODE," and "REM;" when you press the [ F5 ( ONLY THIS )] key you'll copy only that item.
When you press the [ F7 ( EXIT )] key, the display image changes to what you see on page 31; press the keyboard's [ EN-
TER ] key to do a duplicate check, and press the [ ENTER ] key once more to return to the log input page and copy the data.
If you select a line of data using the [ F1 ( )] and [ F2 ( )] keys, pressing the [ F6 ( ALL SELECT )] key followed by
[ F7 ( ENTER )] key will cause the display image to change to what you see on page 31, and you may now press the
keyboard's [ ENTER ] key to do a duplicate check. Press the [ ENTER ] key once more to return to the log input page and
copy the data to that page (however, the "NUMBER," "RST," "BAND," and "MODE" data will not be copied).
Previously-entered log data may be edited alter, if desired.
on page 31, press the [ F2 ( )] /
1. Referring to Figure
[ F3 ( )] key to select the log data to be Editing, then
press the [ F4 ( EDIT )] key to open the "EDIT MODE"
list.
2. Now you may use the arrow keys on your keyboard to
move the highlighted area through the log.
3. Use the keyboard to change data within the currently-
highlighted area.
4. Press the [ F4 ( RECORD )] key when you are finished
editing the entries you have worked on.
If you do not wish to save your changes, press the
[ F5 ( UN-RECORD )] key instead.
Advice: Data may easily be deleted, if you make a mis-
take, enter duplicate data accidentally, etc.
To erase data, use steps 1 and 2 above to select the data to
be erased. Then press the keyboard's [ ESC ] key; the data
will be deleted. Press [ F4 ( RECORD )] to return to the
screen depicted on page 29 and end this procedure.
DMU-2000 D
M
B
P
on page 31, enter the de-
E
L
U
L
B
-QSO C
CHECK
B
E
F
"C
M
" L
"E
M
" L
Page 35
Hide quick links:
Advertisement
Table of Contents
