Turning To The Standby Mode; Setting The Time When The Unit Disconnects - Sony RSE-500 Operating Instructions Manual

Video transmitter
Hide thumbs Also See for RSE-500:
Table of Contents

Advertisement

Automatically
You can automatically switch among the pictures (up
to 256 cameras) at regular intervals.
Setting theTiine When the
Pictures are Switched
1
Select 9. CAMERA AUTO SCAN from the
SETTING menu.
The following screen appears.
Select the minutes using
or
then press
ENTER one by one.
The selected number is entered in the minutes box.
Press ♦ and select the seconds using ♦ or
then
press ENTER one by one.
The selected number is entered in the seconds box.
• An asterisk is displayed where nothing is entered.
• If you select 0 for minutes and seconds, the
pictures are not switched automatically.
Move the cursor to <OK> using
then pre.ss
ENTER.
The .setting is registered and the SETTING menu
appears.
You can set the system to disconnect the line
automatically or turn to standby mode automatically to
save power.
Setting the Time When the Unit
Disconnects From the Line or
Turning to the Standby Mode
To set the time when the unit disconnects from the
line, select lO. TIME OUT I from the SETTING
menu.
To set the time when the unit turns to the standby
mode, select 11. TIME OUT 2 from the SETTING
menu.
The following screen appears. (The illustration
below is for selecting lO. TIME OUT I.)
2
Select the minutes using ♦ or
then press
ENTER one by one.
The selected number is entered in the minutes box.
Press ♦ and select the .seconds using ^ or
then
press ENTER one by one.
The selected number is entered in the seconds box.
• An asterisks is displayed where nothing is
entered.
• If you select 0 for minutes and seconds, the unit
does not automatically disconnect from the line or
turn to the standby mode.
3 Move the cursor to <OK> using
then press
ENTER.
The setting is registered and the SETTING menu
appears.
To turn on the power from the standby mode
• Press any key on the Video Transmitter or Remote
Commander.
•Select any location on the tablet (not supplied).
2"14(EN)
Chapter 2
Setup Using the SETTING Menu

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rse-400

Table of Contents