Inset Window Setting.2-10 (En); Port Setting.2-10 (En); Setting Up The Alarm In Port. 2-10 (En) - Sony RSE-500 Operating Instructions Manual

nset Window Setting
■ Port Setting
You can set the unit to display the inset window and
select the corner in which the inset window appears
on.
This section describes how to set the ALARM IN,
RELAY OUT. CAMERA CONTROL, COMPUTER,
TABLET, USER DATA ports.
Selecting the Position of the
Inset Window
1
Select 18. PinP from the SETTING menu.
The following screen appears.
-PinP-
3 CS B C SEE
<CANCEL> <0K>
2
Select the position of the inset window using ♦ or
i^.
The selected setting becomes highlighted.
r~1: The inset window is displayed in the upper-
right comer.
|'~J: The inset window is displayed in the lower-
right comer.
: The inset window is displayed in the lower-
left comer.
(*~|; The inset window is displayed in the upper-
left comer.
OFF: The inset window is not displayed.
3
Move the cursor to <OK> using ♦, then press
ENTER.
The inset window position is set and the SETTING
menu appears.
Setting Up the ALARM IN Port
'^'ou can write comments for the ALARM IN port to
identify what is connected to each port.
1
Select 21. ALARM IN from the SETTING menu.
The following screen appears.
— -ALARM IN-
iPORTl
1
P0RT2
PORTS
P0RT4
PORTS
PORTE
PORT?
PORTS
<EXIT> <0K>
Select the port number (PORTl - 8) using ♦ or
then press ENTER.
The following screen appears.
ALARM PORTl:
[*****************]
<T)T> [TAB'Cyi
0123456769
ABCDEFGHIJKLMNOP
0R5TUUIUXY2
abcdefghijklmnop
q rstuvwxyz
!
< = >?©[\■_] ( )- + x/\©
5F BS
<CANCEL> <0K>
Press ♦ and select characters using ♦, 4
,
4 or 4
,
then press ENTER character by character.
Selected characters are entered in the box.
• A comment can be up to 17 characters long.
• Select SP for spaces.
• An asterisk is displayed where nothing is entered.
After writing a comment, move the cursor to
<OK> using 4
,
then press ENTER.
The comment is registered and the SETTING
menu appears.