Connections For The Terminal Site - Sony RSE-500 Operating Instructions Manual

Connections for the Terminal Site
The basic connections for the terminal site are shown
below. (The illustration below is RSE-500,)
o
=r
CD
•D
CD
1) If you connect the microphone which has an XLR connector to the MIC IN jack, use the following audio conversion cable
(not supplied).
• When the microphone has a female connector, use EC-0.4CM (17
'U
inches (45 cut). 4-pin<—►XLR (male)).
• When the microphone has a male connector, use EC-D 4CF (17
'U
inches (45 cm), 4 pin<—►XLR (female)).
^ e: _