Setting Up The Relay Out Port; Setting Up The Computer Port - Sony RSE-500 Operating Instructions Manual

Setting Up the CAMERA
CONTROL Port
You can select input or output of the CAMERA
CONTROL port.
Setting Up the RELAY OUT Port
You can select input or output for the RELAY OUT
port and write comments for the port to identify what
is connected to each port.
1
Select 22. PARALLEL I/O from the SETTING
menu.
The following screen appears.
tPORTl ]1N
P0RT2 IN
PORTS
I N
P0RT4 1 N
PORTS IN
PORTS IN
PORT? IN
PORTS
IN
<EXIT> <0K>
2
Select the port number (PORTI - 8) using
or ♦.
then press ENTER.
The following screen appears.
3
Select IN or OUT using ♦ or then press ♦.
The cursor moves to <ABC>.
4
Press ♦ and select characters using ♦, ♦ or
then press ENTER character by character.
Selected characters are entered in the box.
•A comment can be up to 17 characters long.
• Select SP for a space.
•An asterisk is displayed where nothing is entered.
5
After writing a comment, move the cursor to
<OK> using ♦, then press ENTER.
The setting is registered and the SETTING menu
appears.
1
Select 23. CAMERA CONTROL from the
SETTING menu.
The following .screen appears.
2
Select INPUT or OUTPUT using > or
3
Move the cursor to <OK> using then press
ENTER.
The setting is registered and the SETTING menu
appears.
Setting Up the COMPUTER Port
1
Select 24. COMPUTER from the SETTING menu.
The following screen appears.