Sony RM-M7G Service Manual page 8

RM-M7G (UC)
MONITOR SUS
CANIERA
REMOTE CONTROL UNIT
DC INPUT 12 0.4W
Sear Comominon
Made nsapen
CAMERA SELECT selector
a a
Rear
[1] MONITOR connector (BNC type)
This connector outputs video signals (VBS) to be
monitored.
Connect to the video input connector of a video monitor.
Character information such as the settings of the
switches or controls can be added to the video signals
when you set the DISP switch of the CCU-M7, which is
connected to this unit, to ON.
[2] CCUICAMERA connector (10-pin)
Connect to the REMOTE connector of the video camera
DXC-M7, or the camera control unit CCU-M7 by using the
camera remote control cable CCA-7-5/25/50/100 (optional).
ww
(3} AUX (auxiliary) connector (10-pin)
This connector is available for the future expansion of the
remote control functions.
Bottom
CAMERA SELECT selector
Set this selector according to the connected equipment as
follows:
DXC-M7 video camera or CCU-M7 camera control
unit (factory-setting)
For the system expansion in the future.
For the system expansion in the future.
till
1. GEN DES