Sony RM-M7G Service Manual page 16

SONY PANEL )(UTE
ACTIVE O|| START O
MODE selector
a rl
MASTER
O
REMOTE O' UNIT _RM-M7G
GAIN selector
ie]
AUTO WHITE
PRESET,
MANUAL BLACK
BLUE---—__ °
MASTER GAMMA
PED
KNEE
AUTO
PRESET [J
MANUAL
MASTER
PEDESTAL
REMOTE CONTROL UNIT RM-M7G
RM-M7G (UC)
Selecting the Signals Output from the
MONITOR Connector
CAMERA: | You can monitor the pictures shot by the
video camera on the monitor.
BARS: You can monitor the color bars on the
monitor and then use these color bars to
adjust the color of the video monitor.
TEST: You can monitor the test signal on the
monitor and then use this to adjust the knee
point and gamma.
If a clear picture cannot be obtained because of
insufficient lighting, raise the video output level by
using the GAIN selector.
Normally set to this position.
The output video level is increased by 9 dB,
18dB The output video tevel is increased by 18 dB.
TH
1. GEN DE