Table of Contents
Advertisement
Turn the power of the connected equipment ON.
Set the MODE selector to CAMERA.
Set the LOCK selector to OFF.
Set the selector and buttons as follows:
MODE selector: BARS
GAIN selector: 0 dB
KNEE selector: AUTO
W/B BALANCE selector: AUTO
SHUTTER selector: OFF
GAMMA PRESET/MANUAL switch: PRESET
IRIS AUTO/MANUAL switch: AUTO
Adjust the color of the video monitor by using the
COLOR and HUE controls of the video monitor,
referring to the color bar signal.
Preventing the settings from being
changed unintentionally after the
adjustments are completed
Set the LOCK selector to ON after the adjustments are
completed.
The operation of the switches, buttons and controls on
this unit is then locked, and the adjusted values can be
maintained.
If you set the LOCK selector to PART, the operation of
the switches, buttons and controls except MASTER
PEDESTAL control, IRIS AUTO/MANUAL switch and
IRIS control (indicated by blue letters) is locked.
To readjust the settings, set the LOCK selector to OFF.
To monitor the return video signals (when the CCU-M7 is
connected)
You can see the return video signal (the signals selected on
the control console) in the viewfinder.
¢ Supply a program output signal from the console to the
RETURN VIDEO connector on the CCU-M7''s rear.
¢ Set the VF VIDEO selector of the camera to AUTO.
¢ Press the VTR START button of this unit connected to the
video camera.
When two or more cameras are used, the camera operator
can check the final picture, for example, how their pictures
are combined.
Select the appropriate filter with the FILTER
selector on the camera according to the lighting
conditions.
Start shooting.
Adjust the gain, white/black balance, knee, gamma, iris,
master pedestal, etc., if necessary. For details, see
"Adjustments".
T
1, GEN
DES
Advertisement
Table of Contents
