Planet IXT-900 Series User Manual page 31

Industrial 10g managed media converter
Table of Contents

Advertisement

MGB-LB80
1000
MGB-TLA10
1000
MGB-TLB10
1000
MGB-TLA20
1000
MGB-TLB20
1000
MGB-TLA40
1000
MGB-TLB40
1000
MGB-TLA80
1000
MGB-TLB80
1000
MGB-TSA
1000
MGB-TSB
1000
MGB-TLA120
1000
MGB-TLB120
1000
It is recommended to use PLANET SFP on the Industrial 10G Managed Media Converter.
1.
If you insert an SFP/SFP+ transceiver that is not supported, the Industrial 10G Managed
Media Converter will not recognize it.
Before we connect the Industrial 10G Managed Media Converter to the other network device, we have to make sure both
1.
sides of the SFP transceivers are with the same media type, for example: 10GBASE-SX to 10GBASE-SX, 1000BASE-LX
to 1000BASE-LX.
Check whether the fiber-optic cable type matches with the SFP transceiver requirement.
2.
To connect to 10GBASE-SR SFP+ transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.
To connect to 10GBASE-LR SFP+ transceiver, please use the single-mode fiber cable with one side being the male
duplex LC connector type.
Connect the fiber cable
Insert the duplex LC connector into the SFP/SFP+ transceiver.
1.
Connect the other end of the cable to a device with SFP/SFP+ transceiver installed.
2.
Check the LNK/ACT LED of the SFP/SFP+ slot on the front of the Industrial 10G Managed Media Converter. Ensure that
3.
the SFP/SFP+ transceiver is operating correctly.
Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or Media Converters, user
4.
has to set the port Link mode to "10G FDX", "1000M FDX" or "100M FDX".
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
LC
Single-mode
31
User's Manual of IXT-900 Series
80km
1550nm
10km
1310nm
10km
1550nm
20km
1310nm
20km
1550nm
40km
1310nm
40km
1550nm
80km
1490nm
80km
1550nm
2km
1310nm
2km
1550nm
120km
1490nm
120km
1550nm
0 ~ 70℃
1310nm
-40 ~ 85℃
1550nm
1310nm
-40 ~ 85℃
-40 ~ 85℃
1550nm
-40 ~ 85℃
1310nm
-40 ~ 85℃
1550nm
-40 ~ 85℃
1310nm
-40 ~ 85℃
1550nm
1310nm
-40 ~ 85℃
1550nm
-40 ~ 85℃
-40 ~ 85℃
1310nm
-40 ~ 85℃
1550nm
-40 ~ 85℃
1310nm

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ixt-900-1x1tIxt-900-2xIxt-900-2x1tIxt-900-2x1pd

Table of Contents