Table of Contents
Advertisement
PC Connection
Digital PhotoShot Software
A live image or stored still image in the
System Requirements:
Camcorder's memory can be transferred
e IBM PC/AT or compatible.
directly to your PC (Personal Computer).
e Windows 95.
Likewise, the PC's memory can be
¢ 486 CPU or higher. (Pentium® recom-
transferred directly to Camcorder via an
E
MB
.
E
* 2MB minimum available hard disk space.
You can also download title images from
¢ 256 color monitor (full color recom-
Panasonic's web site on the Internet
mended).
(www.panasonic.com/photoshot ).
* 3.5 inch 1.44MB floppy disk drive (for
installation).
e RS-232C serial port (D-Sub 9-pin). An
adaptor (D-Sub 9-pin male to a D-Sub
female) is required for a D-Sub 25-pin.
* Mouse or other pointing device.
* Microsoft, Windows, and Windows 95 are
registered trademarks of Microsoft in the
United States and other countries.
e All product/orand names are trademarks
or registered trademarks of the respective
holders.
PC-Camcorder Connection
Connect the supplied PC connecting
cable to the PC connection jack on the
RS-232C
Camcorder and a Serial port on the PC
Serial Port
(Personal Computer).
(D-Sub 9-pin)
(Please refer to the PC's instruction book
to clarify what port should be used to
connect.)
Y)
"DO
©
O
-4
"TI
©
©
pmp
=
—
(D
7
PC Connction
Cable
(supplied)
Note:
¢ Before connecting the Camcorder to the
PC, make sure the PC power is off to
insure that images are transterred
properly.
+ While the camcorder is connected to a
PC and the software is opened, you tape
recording is not possible.
99
Advertisement
Table of Contents
