Panasonic Palmcorder PalmSight PV-L858 Instruction Manual page 30

Playing Back your Recordings
Special Effects Playback Before you begin...
* Connect the Palmcorder to a power source.
¢ Insert a recorded cassette.
FAST * Set the POWER switch to VCR.
FORWARD
To rapidly locate a scene
Press PLAY then press FAST
FORWARD/SEARCH or REWIND/
SEARCH for rapid visual search.
Press again, or press PLAY to resume
normal speed.
View a Still Picture
Press STILL to freeze the picture.
Press again to resume normal playback.
DISPLAY
UP de
Search Speed
DOWN V P
Standard Play (SP} Search is about 3
times the norma! speed, and Super Long
Play (SLP} Search is about 9 times the
normal speed.
Note:
* During search playback, horizontal noise bars will appear and there will be no audio.
° o PS the tape and the video heads, your Palmcorder's operating modes will revert as
ollows:
STILL ——— STAND-BY after 5 minutes.
STANDBY —> POWER OFF after 5 minutes when using a Battery Pack.
* When the tape reaches its end during playback, or fast forward, it will rewind automatically.
Continuously analyzes the signal of each
recording for optimum picture quality.
Manual Tracking
To minimize the noise in some recordings,
manual tracking may be necessary.
For Noise in Playback mode:
Press UP 4 or DOWN Y until picture
clears up.
Press DISPLAY to return to Auto Tracking.
For Noise in Still mode:
Press UP A or DOWN Y until picture
clears up.
V-Lock Control (Reduces jitter in Still
mode.)
Press DISPLAY and UP A or DOWN V
until picture is stable.
30