Panasonic Palmcorder PalmSight PV-L858 Instruction Manual page 58

Using the Digital Still Camera
Using the image as a Wipe
You can use the still image, captured in PHOTO Mode, as a WIPE screen for title
memory. (See page 54.)
Before you begin...
+ Connect the Camcorder to a power source.
¢ Set the POWER switch to PHOTO and slide
the PHOTO MODE selector to PLAY.
I Set the DIGITAL SELECT Switch to
DIGITAL WIPE. (Refer to page 42.)
Z Select the image from the Multi
Image screen that you want to use
as a WIPE image.
EEES
IL)
SELECT: PUSH +-KEY 02
3 Slide the POWER switch to
CAMERA.
* The memorized scene is displayed in
the EVF for one second and "MEM."
is displayed while the scene is
memorized.
ys sica the WIPE MODE button (see
page 42), and then press the START
button to start the WIPE effect.
The memorized image gradually
replaces the current recording.
WIPE START Note:
The selected scene will be cleared when
the Camcorder is turned off.
98