Printing In Black And White; Selecting Black And White For Pcl Drivers - Xerox Phaser 7760 Advanced Features Manual

Printing in Black and White

If you want your output in black, white, and shades of gray, you can select Black & White in a
supported printer driver:
Operating System
Windows 98 SE,
Windows 2000,
Windows XP,
Windows Server 2003
PostScript driver
Mac OS 9 driver
Mac OS X (version 10.2
and higher) driver

Selecting Black and White for PCL Drivers

The PCL driver does not contain the black and white color setting. If you are using a PCL
driver, you need to select Black & White on the control panel:
1.
On the control panel, select
2.
Select PCL Setup , and then press the OK button.
3.
Select , and then press the OK button.
Color Mode
4.
Select
Black & White
Note:
Changing the color mode to Black & White on the control panel affects all print jobs.
Ensure the color mode is set back to color when your print job is finished.
Steps
1. Select the TekColor tab.
2. Select Black & White.
1. In the Print dialog box, select Print Quality/Color 1.
2. Select Black & White from the Color Correction drop-down list.
1. In the Print dialog box, select Image Quality from the drop-down
list.
2. Select Black and White from the Color Correction drop-down list.
, and then press the OK button.
Printer Setup
, and then press the OK button.
Phaser® 7760 Color Laser Printer
1-12
Printing in Black and White