Inspection and maintenance
▶ Remove the cover.
1
Fig. 59 Disassembly of the condensation catch pan cover
[1]
Cover of condensation catch pan
▶ Remove the dirt trap: press the bottom tabs slightly together so the
dirt trap can be lifted up and out of the drainage connection.
▶ Rinse the dirt trap and siphon under running water.
1
Fig. 60 View of condensation catch pan without cover
[1]
Dirt trap
44
Fig. 61 Dirt trap following removal
[1]
Dirt trap
Cleaning the heat exchanger mechanically
0010012528-001
A plastic scraper is available as an accessory for mechanical cleaning of
the condensation catch pan.
A cleaning blade is available as an accessory for dry-cleaning the heat
exchanger. Cleaning equipment for wet cleaning is also available as an
accessory.
The cleaning covers are always on the flow and return connection side
(service side), which depends on whether the boiler is a right or left-
hand version.
▶ Remove the clips [1] on the thermal insulation.
▶ Remove the thermal insulation [2] from the heat exchanger.
0010013911-001
1
0010013912-001
Condens 7000 FP – 6721846699 (2022/12)