Selecting Print Features - Tektronix Phaser 540 User Manual

3
Printing

Selecting print features

3-8
Phaser 540 Color Printer
This printer provides three print-quality modes as well as TekColor color
corrections that you can select to customize your prints. There are three
ways to select print features:
Through the printer driver
Print selections made using the Tektronix printer driver override
the settings on the printer's front panel. Refer to the Phaser 540
Drivers and Utilities Printing Reference.
From the printer's front panel
Settings you make on the front panel are only used when printing
from a non-Tektronix driver. Refer to the instructions included in
this chapter.
Sending a PostScript utility file to the printer
Printer settings downloaded to the printer's front panel are only
used when printing from a non-Tektronix driver. Refer to the Phaser
540 Drivers and Utilities Printing Reference.
Note
For network setup protection, the front panel access to setup
parameters may be limited. Refer to "Protected mode for the front
panel menu" on page 7-4 for details.