Printer Doesn't Appear In The Chooser (Macintosh); Power Indicator Blinks And Stops, But The File Does Not Print; Printer Will Not Power Up To Ready - Tektronix Phaser 540 User Manual

Printer doesn't appear in the Chooser (Macintosh)

Make sure that the printer is turned on and the cables are correctly
attached.
Check the termination (refer to the documentation for your
network adapter or connector for information on termination).
Make sure that you have the correct zone selected in the Chooser
before looking for the printer's name in the list of printers.
If you have changed the printer's name, make sure that you have
given it a unique name (not the same as any other printer in the
zone or on the network).
Make sure that the correct network is selected in the Network
Control Panel.
Power indicator blinks and stops, but the file does not print
This is probably the result of a PostScript error. Download the PostScript
error handler file from the Phaser 540 utility diskettes. For more information
on using the PostScript error handler, see the manual Phaser 540 Drivers and
Utilities Printing Reference.

Printer will not power up to Ready

This may be the result of an unterminated network connection. The printer
sees network activity, but is unable to successfully connect.
Troubleshooting
6-17
User Manual
6