Installing The Phaser 540 Gx Driver - Tektronix Phaser 540 User Manual

2
Getting Set Up
2-34
Phaser 540 Color Printer

Installing the Phaser 540 GX driver

1.
Make sure that your Macintosh has QuickDraw GX installed and
is running System Software version 7.5.
2.
Insert the Macintosh Driver and Printer Utilities diskette into the
disk drive.
3.
When the diskette appears on the desktop, it should be open,
showing the icons inside.
4. Drag the Phaser 540 GX driver icon from the diskette to the closed
System Folder icon on your Macintosh hard disk. At the alert
message, click
OK
Extensions folder.
5. Select Chooser from the Apple menu.
6. Click the Phaser 540 GX printer driver icon on the left side of the
Chooser. A list appears with the printers you have connected to
your Macintosh or printers that are available on a network. (If the
printer driver icon does not appear, Restart your Macintosh, and
repeat the printer driver installation procedure; also check the
cable connections on your computer and printer.)
7. In the Connect via field's pop-up menu, select your printer's
communication method:
The AppleTalk option is the standard network connection.
The Servers option is used to select a shared desktop printer. See
the Phaser 540 Drivers and Utilities Printing User Reference manual for
details.
8.
Click on the Phaser 540 in the list of printers on the right side of
the Chooser.
9. Click the Create button to create a desktop printer. An icon of the
printer appears on the desktop with the same name as the printer
selected in the Chooser.
10. Close the Chooser by clicking its close box.
11.
Store the printer diskette in a safe place.
to automatically install the driver in the