Xerox Phaser 4510 Advanced Features Manual page 48
Xerox phaser 4510: supplementary guide
Hide thumbs
Also See for Phaser 4510:
- User manual (145 pages) ,
- Quick use manual (6 pages) ,
- Install manual (4 pages)
Table of Contents
Advertisement
Setting Control Panel Accessibility Behavior
Control panel accessibility settings modify the control panel behavior to improve accessibility
for some individuals with disabilities. There are two control panel accessibility settings:
■
Off: The control panel times out after a short period of no activity. Holding down a key
results in multiple entries of that key.
■
On: The control panel does not time out. Holding down a key does not result in multiple
entries of that key.
To adjust the control panel accessibility settings, use one of the following options:
The printer's control panel
■
■
CentreWare IS
Using the Control Panel
To turn on/off control panel accessibility on the control panel:
1.
Select
Printer Setup
2.
Select
Control Panel Setup
3.
Select
Accessible Control Panel
4.
Select
or
, and then press the OK button.
On
Off
Using CentreWare IS
To turn on/off control panel accessibility using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left navigation panel.
5.
Select Printer Defaults.
6.
In the Accessible Control Panel drop-down list, select On or Off to change the setting.
7.
Click the Save Changes button at the bottom of the screen.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
Phaser® 4510 Laser Printer
4-3
Printer Settings
Advertisement
Table of Contents
Troubleshooting
