Xerox DocuTech 180 Install Manual page 3

Installation Preparation Document
Network Connectivity
The DT 1xx HLC supports the following connectivity:
Network Operating Protocol
System
Novell 3.x / 4.x IPX / SPX
(NDS or Bindery
mode)
Windows NT 4.0 / TCP / IP LPR
Win2000 / WinXP
AppleTalk EtherTalk
LPD Server TCP / IP
(Unix Systems)
Online Channel
3211/4245
NOTE: Token Ring is not available for AppleTalk or Novell
environments.
The system supports Port Printing, and HTTP and IPP Printing
modes. Additionally, SNMP Services and DocuSP Remote Workflow
can be enabled on the customer's network.
Print Drivers - Environments
The DT 1xx HLC supports the following print drivers:
•
Windows 95/98/ME/2000/XP
•
Windows NT 4.0
•
MAC OS 8.6 & higher
•
Solaris 2.8
PDL Compatibility
The system interprets the following data streams:
•
PostScript Level 3
•
HP PCL5c / HP PCL6
•
ASCII
•
PDF
•
TIFF
•
VIPP
•
PPML
Additional data streams will be available post-launch.
Printing Considerations
Not all features and capabilities are available with every print driver
and OS/Protocol combination. Custom software applications may
produce unexpected results.
Other Considerations
•
The Xerox Welcome Center at 1-800-821-2797 is available to
provide customer support.
701P46151
October 2006
Xerox DocuTech 180 HighLight Color
Topology
Ethernet
Ethernet / Token Ring
Ethernet
Ethernet / Token Ring
IBM Ethernet / Token Ring
Bus and Tag
(for physical installation of the product only)