Install Planning; Device Configurations; Space Requirements - Xerox DocuTech 128 Planning Manual
Solutions planning guide
Hide thumbs
Also See for DocuTech 128:
- Operator's manual (174 pages) ,
- Install manual (3 pages) ,
- Software manual (506 pages)
Table of Contents
Advertisement
C.P. Bourg Document Finisher (BDFx)
Install Planning
Device Configurations
Space Requirements
This Install Planning guide will help you prepare for the installation
of the C.P Bourg Document Finisher (BDFx) together with:
•
Xerox DocuTech 61xx
•
Xerox DocuTech 1xx HighLight Color (HLC)
•
Xerox DocuPrint 1xx
•
Xerox iGen3 Digital Production Press
•
Xerox Nuvera 100 / 120 Digital Production System
The Bourg Document Finisher components are:
•
BDFx with Conveyor and 2 Cassette Stitch Heads
•
Bourg Cover Feeder X (BCFx), optional (not available with
iGen3)
•
Square Edge Module (SQEDG), optional
•
Bourg Sheet Rotator (BSR), optional (mandatory with iGen3)
•
Hohner or Cassette Stitch Heads (2 –4 heads total), optional
Note: The BDFx is delivered with 2 stitch heads. A third and / or
forth stitch head must be ordered and installed with the machine.
The space requirements illustration provides machine footprint as
well as the overall operating and maintenance area.
In addition to the diagram below, there should be a minimum of 82
inches (2.083 mm) clearance from the floor to the nearest overhead
obstruction.
1-2
Advertisement
Table of Contents
