Table of Contents
Advertisement
Safety Notes
iv
The Xerox DocuPrint P8e and its supplies are designed and tested to meet
strict safety requirements. This chapter contains information to ensure the
continued safe operation of your Xerox DocuPrint P8e.
Laser Safety
The Xerox DocuPrint P8e complies with safety standards, and is certified
as a Class 1 Laser product under the US Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the
Radiation Control for Health and Safety Act of 1968. The printer does not
emit hazardous laser radiation.
CAUTION The use of controls, adjustments, or procedures other
than those specified in the documentation might result in
hazardous exposure to laser light.
Since radiation emitted inside the printer is completely confined within the
protective housings and external covers, the laser beam cannot escape
from the machine during any phase of user operation.
The Center for Devices and Radiological Health (CDRH) of the US Food
and Drug Administration implemented regulations for laser products of
August 1, 1976. These regulations apply to laser products marketed in the
United States. The label on the machine indicates compliance with the
CDRH regulations and must be attached to laser products marketed in the
United States.
The Xerox DocuPrint P8e contains laser danger labels. These labels are
intended for use by Xerox Service Representatives, and are placed on or
near panels or shields that require special tools for removal. Do not
remove any of these panels. There are no operator serviceable areas
inside these covers.
Ozone Safety
During normal operation, the Xerox DocuPrint P8e produces ozone. The
ozone produced does not present a hazard to the operator. However, it is
advisable that the machine be operated in a well ventilated area.
If you need additional information about ozone, please request the Xerox
publication Ozone (part number 600E74140) by calling 1-800-828-6571 in
the United States and Canada.
Advertisement
Table of Contents
