As/400 Data Flow - Xerox DocuPrint 180 Solution Manual
Xerox docuprint 180: supplementary guide
Hide thumbs
Also See for DocuPrint 180:
- Message manual (356 pages) ,
- Configuration manual (276 pages) ,
- System configuration manual (132 pages)
Table of Contents
Advertisement
AFP PRINT FLOWS
AS/400 data flow
D-2
VM print flow
1. CMS print command is issued.
2. CMS writes to a virtual printer.
3. CP intercepts the command and data.
4. CP spools the data to DASD.
5. When the specified printer is available according to job control
parameters, CP schedules the job to PSF.
6. PSF identifies and retrieves any necessary AFP resources
stored on DASD.
7. PSF composes the data stream into IPDS and directs the
output to a printer.
VSE print flow
1. The job is submitted to POWER.
2. POWER schedules the job for execution.
3. When the job is finished, POWER spools the output.
4. When a printer is available and the print criteria are met,
POWER submits the data to PSF.
5. PSF identifies and retrieves any necessary AFP resources
stored on DASD.
6. PSF directs the output to a printer. After PSF is finished, the job
is purged from POWER.
PSF/400 accepts MO:DCA-P data streams, as well as SCS data
streams with DDS, IPDS, and line data.
OS/400 print flow
1. An application creates the print output.
2. OS/400 spools the output to DASD.
3. When the specified printer is available according to the job
parameters, PSF identifies and retrieves any necessary AFP
resources stored on DASD.
4. PSF composes the data stream into IPDS and directs the
output to the printer.
DOCUPRINT IPS SOLUTIONS GUIDE
Advertisement
Table of Contents
