Connectivity Solutions - Xerox DocuPrint 180 Solution Manual

DOCUPRINT IPS SYSTEM

Connectivity solutions

System
configuration
IPS
3-10
This section/table provides the valid connectivity solutions for the
stand-alone and dual mode configurations of the DocuPrint IPS
printer series.
Note: Please note these connectivity limitations:
•
•
•
•
Table 3-2.
Bus & Tag
Token Ring
Bus & Tag Token Ring
Bus & Tag
Bus & Tag
Token Ring
Token Ring
Bus & Tag Token Ring
Bus & Tag Token Ring
In IPS mode, only one connection is active at any given time.
In Dual Mode configuration, while in IPS mode, PostScript and
PCL jobs may be spooled in the background.
In Dual Mode configuration, switching between modes requires
a soft reboot.
Fiber Distributed Data Interface (FDDI) connections are not
supported on DocuPrint IPS systems.
Connectivity solutions
System connectivity combinations
Ethernet 10Mb
Ethernet 10Mb
Ethernet 10Mb
Ethernet 10Mb
Ethernet 100Mb
Ethernet 100Mb
Ethernet 100Mb
Ethernet 100Mb
DOCUPRINT IPS SOLUTIONS GUIDE