Diagnostics menu tasks
Printing samples
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
The following procedures can be accessed from the Diagnostics pull-
down menu.
•
Printing samples
•
Capturing a trace
•
Executing a captured trace
•
Printing a trace file
•
Setting the debug level
•
Updating the software using a diskette or a CD
•
Updating the software remotely.
This section describes the procedure for setting up and printing
sample files (test patterns).
To set up and print sample files:
1. From the Diagnostics menu, select Sample Prints. The Sample
Prints window displays.
Figure 4-8.
Sample Prints window
2. Specify the test pattern and the criteria you want to use to print
the sample file.
SETTING THE SYSTEM CONFIGURATION
4-15