Lcds - Xerox DocuColor 6060 Getting Started

DOCUSP 3.74

LCDS

3-10
User Control of Resources
¨ In this release, LCDS resources are not displayed until the
operator selects the Display button.
¨ Previously, selecting the LCDS Resource Manager tab in
Administration caused all LCDS resources to display. This
was time consuming, especially for customers with tens of
thousands of resources.
JDL staple support for DocuPrint 75/90
¨ The LCDS STAPLE command is now available for use with
the DP 75/90. The system does not require override settings
to be set in the Queue properties for stapling to work.
¨ The STAPLE command must be invoked before the start of
the job or on the first record of data in the job. Otherwise,
the DP 75/90 will ignore the STAPLE switch if a JDE/JDL
switch is made in the middle of the job.
¨ Jobs can be offset and stapled simultaneously.
¨ Jobs requiring N to 1 or Face Up and STAPLE=YES are
forced to print 1 to N and Face Down due to a restriction on
the stapling feature on the DP 75/90.
¨ Jobs that contain over 50 pages will not be stapled, and the
default setting is to fault the job. To change the setting to
print the job unfinished in the System Preferences Job Policy
tab:
· Select Print Job Unfinished under the Overlimit Finishing
section.
·
Select Check Set-Size Before Printing under the
Overlimit Finishing section.
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED