Docusp 3.70/3.73 New Features; All Docusp-Based Products - Xerox DocuColor 6060 Getting Started

All DocuSP-based products

XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED

3. DocuSP 3.70/3.73 new features

The following is a list of the features and functions available in
the DocuSP Version 3.70 and 3.73 software. For customers
upgrading from an earlier version, this list details the
enhancements available to you in this version of the software.
For detailed information on each of these new features, refer to
the DocuSP Help system or contact your Xerox customer trainer.
Security
¨ With DocuSP 3.7, the System Administrator can adjust the
system security in the Security Setup window. Previously a
Xerox representative performed this change. Default setup
upon installation is a security setting of High. Refer to the
System Guide for details on the security settings and what
each means.
A change in the security setting requires a complete
Shutdown and reboot of the DocuSP controller.
A security setting of High disables connectivity to the
DocuSP controller using ftp and telnet. Some client
applications, such as DigiPath, may not be able to
communicate with the DocuSP controller with a security
setting of High. Set the Security setting to Medium to allow
DigiPath and other client applications to communicate
correctly with the DocuSP controller.
The scripts for enabling or disabling portions of the security
are still available. Refer to the System Guide for details on
the scripts.
¨ The HTTP gateway is loaded and running by default. The
HTTP gateway allows users with Internet access to the
controller to submit jobs by opening a standard web browser
and entering the IP address of the DocuSP controller.
Setting the security to high does not restrict this client.
Disabling the license does not prevent this service from
running. Customers who do not wish to allow this kind of
access should remove the XRXhttp package by following the
steps below.
1. Open a terminal window and login as root user.
2. Type pkgrm XRXhttp and press <Enter>.
3. Answer y to the prompts.
4. Shutdown and reboot the DocuSP controller.
3-1