Job Forwarding - Xerox DocuColor 6060 Getting Started

DOCUSP 3.74
3-2
NOTE: Once a script is run, the setting is permanent until
the disabling script is run or the Security setting in the
DocuSP UI is toggled from Medium to High. For example,
the security is set to High, but the enable-ftp script is run.
FTP is not enabled until the disable-ftp script is run, or until
the security setting is toggled to medium and then back to
high. The DocuSP controller needs to be rebooted after the
toggle from high to medium to high is complete.

Job Forwarding

¨ The Job Forwarding feature now allows the ability to include
or exclude the Xerox Job Ticket when the job is forwarded to
another printer. The benefit of this option is to allow control
over which job attributes are maintained between the
originating printer and the destination printer. This option
was part of the DocuSP 3.61.19 release.
· Examples of when to include the job ticket would be
when forwarding to a DocuSP-based printer at software
level 3.x or higher and the job has been programmed
with a Xerox Job Ticket or the job has been
programmed with special programming instructions such
as exception pages or color attributes.
·
Examples of when to exclude the job ticket would be:
o when forwarding to a non-DocuSP based printer that
does not comprehend the XPIF job ticket format.
o the job contains PDL programming information such
as through setpagedevice commands within
PostScript or tray calls within PCL.
o when jobs include subset finishing.
o when forwarding a job to a printer with a DocuSP
version of 2.x or earlier that does not comprehend
the XPIF job ticket format.
¨ The Job Forwarding interface now includes an accelerator
pull-down for a list of destination printers. This accelerator
allows the operator to add multiple printers to the interface
for quicker job forwarding.
¨ Jobs with a status of Completed can now be forwarded. In
order for completed jobs to be forwarded, the System
Preference for Retain PDL must be set to retain the last 50
jobs.
¨ The operator can now select a range of jobs to be
forwarded, rather than having to select each job separately.
¨ A detailed status is provided on the Job Forwarding screen
for jobs that have been forwarded. The status is retained in
the screen until a DocuSP restart.
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED