Listjob Command - Xerox DocuColor 2060 Supplementary Manual

Listjob command

Syntax
Options
Guide to Submitting Jobs from the Client
Printing using Xerox utilities and lpr utilities (DOS and UNIX)
To display the status of a print job, enter the listjob command
and its options on the command line using the following syntax:
listjob <options>
You may enter more than one option at a time. If you do not
specify an option, this command displays the sender name, job
name, job identifier, and status fields for up to 40 jobs. The
options are not case sensitive.
NOTE: In UNIX, the single character options are not case
sensitive, but the text enclosed in angle brackets below is case
sensitive.
• -\?
Displays the usage statement.
• -a|A <age>
Displays all jobs that have been in the system less than the
specified number of minutes. Displays jobs in chronological
order.
• -e|E
Displays information for every job in the database.
• -i|I <job identifier>
Displays information about the job you specify. You must
specify the identifier for a single job; you cannot use a range
of numbers or a series of numbers separated by commas.
• -j|J <job name>
Displays information for all jobs with the job name you
specify. You must specify the job name exactly as it was
specified in the original print request. You cannot use
wildcard characters.
• -l|L
Displays the sender name, job name, number of copies,
priority, file size, submission time, job id, and job status.
• -n|N <number>
Overrides the default number of records for a request.
3-13