Bosch GSR18V-800FC Operating/Safety Instructions Manual page 15

1
2
3
Lock the adapter in place by turning the
Locking Ring 17 in the direction shown,
4
towards the lock symbol, until it clicks
(Fig. 5).
To remove any adapter:
1
Turn the Locking Ring 17 in the direction
shown (towards the unlock symbol) until
1
2
it clicks (Fig. 6).
2
Pull the adapter away from the tool.
3
3
Rotating Right Angle and 4
Offset Adapters
4
(Fig. 1, 7)
The Right Angle Adapter 16 and Offset Adapt-
er 15 (Fig. 1) can be rotated to any position
around the axis of the tool in 9° increments
(Fig. 7).
Make sure the adapter is locked on the tool.
1
Pull the adapter away from the Locking
1
1
Ring 17 approximately 3/16" (5mm).
2
2
2
Rotate the adapter to a desired position.
3
3
Release the pull and let the adapter re-
3
turn to the locked position.
4
4
4
2610070415 GSR18V800FC 202310.indd 15
page heading Assembly
Fig. 6
GFA 18-M
Fig. 7
GFA 18-B
GFA 18-W
GFA 18-E
GFA 18-WM
(16)
(1) (2)
2
1
(17)
x .
m a
10/24/23 3:15 PM
15