Xerox 4110 Print Options page 11

Option and settings
(default setting is underlined)
Collate
On/Off
Copies
1-(maximum number of copies
depends on operating system)
Create Master
None/1-15
Creep Adjustment
Off/Normal/Thick
Duplex
Off/Top-Top/Top-Bottom
Face Down Printing
Face Down/Face Up
File Search Path
Define file search path
Folding
Off, Bi-fold, Booklet fold, Booklet fold and
staple, Z fold, Tri fold "Z", Tri fold "C"
P O
RINT PTIONS
Description
Specify how to output multiple-page/
multiple-copy jobs.
Specify the number of copies of a job you
want to print.
To create a FreeForm master from this job,
specify a number to assign to the FreeForm
master file.
Use this option to adjust images that may
shift from the center of the sheet in booklets.
Select Thick when you use thick media paper
for your print job.
Select Normal when you use normal media
paper for your print job
Specify whether a job is printed single-sided
or double-sided (duplex), by specifying the
orientation of printed images.
Select Face Down to print your document on
the top of the sheet of paper.
Select Face Up to print your document on
the bottom of the sheet of paper (for
example, the document outputs from the
printer with the text facing down).
Some PPML and Creo VPS jobs do not
contain all the variable data job resources in a
single file. In these cases, specify the location
of the variable data job external resources
on a job-by-job basis, so that the
Fiery EXP4110 can access them.
Specify how to arrange the pages of the job
in special layouts for folding or cutting after
printing.
Requirements, constraints,
and information
For more information, see page
For more information, see Variable Data
Printing.
Command WorkStation allows you to select
up to 100 FreeForm Masters. For more
information, see Command WorkStation
Help.
Creep can occur when booklet jobs have a
large number of pages or when booklet jobs
are printed on thick media. For more
information, see page 20.
This option is not supported for PCL.
For more information about duplex printing,
see page 20.
This option is available only in the printer
driver or Command WorkStation, Windows
Edition Job Overrides.
For more information about printing PPML
and Creo VPS jobs, see Variable Data
Printing.
11
19.