Xerox 4110 Customer Release Notes page 3

Page 3
Disabling TCP/IP does not update dependent options
If you disable the TCP/IP protocol, other options that depend on TCP/IP are not
automatically disabled. You must disable them manually.
If the TCP/IP protocol is disabled, you are prompted to enable TCP/IP before you can access
the following areas under Protocol Setup:
• DNS Setup
• Security Setup
or the following services under Service Setup:
• LPD Setup
• Windows Setup
• Web Services Setup
• IPP Setup
• Port 9100 Setup
• E-mail Setup
• FTP Setup
• SNMP Setup
• LDAP Setup
SNMP limitations
If you change the community name or disable SNMP, Configure does not work.
When you make a change to the SNMP Setup, power the Fiery EXP4110 off, and then
back on.
If you disable SNMP, the automatic search for the Fiery feature in Command WorkStation,
which is based on SNMP, does not work.
If you disable SNMP, the following features are affected:
• Two-Way Communication
• All Fiery EXP4110 applications that search for Fiery EXP4110 controllers
using SNMP (Command WorkStation and Downloader)
• Xerox CentreWare
• Xerox MIBs
Login Window for SNMP
After you change and save the community name, a Login window appears. To validate the
changes, type as the User Name and type the Administrator password in Command
Admin
WorkStation as the Password.
Part Number: 45051581