Xerox 4110 Customer Release Notes page 18

8 Optionally, set one or more of the following options under the Finishing bar:
• Creep Adjustment
• Back Cover
• Front Cover
• Cover Source
9 Click OK to close the Properties window.
10 Set the number of copies.
11 Click OK to submit the job for printing.
Printing a booklet from Mac OS X v10.4
On Mac OS X v10.4, the printer driver constrains some selections if an incompatible setting
is selected. For example, you cannot select any Booklet Maker settings unless you first set the
Duplex option to Top-Top.
Booklet printing requires that a finisher is installed on the printer and that the printer driver is
configured with the installed finisher. For information about configuring installable options,
see Printing from Mac OS.
The following procedure explains how to set the correct print options for printing an 8.5
document as a booklet on 11
paper, using the Mac OS X v10.4 printer driver.
T
O PRINT A BOOKLET FROM
1 Open the document in the application.
2 Select File > Page Setup.
3 Choose the Fiery EXP4110 as your printer, set the Paper Size to 8.5x11 SEF (A4 SEF), and
then click OK.
4 Select File >Print.
5 Choose the Fiery EXP4110 as your printer and choose Printer Features from the drop-down
list.
6 Choose Paper Source 2 from the Feature Sets list.
7 Set Print Size to 11x17 SEF (A3 SEF).
8 Choose Finishing 1 from the Feature Sets list.
9 Set Duplex to Top-Top.
10 Choose Finishing 2 from the Feature Sets list.
17 paper, or for printing an A4 document as a booklet on A3
x
M OS X 10.4
AC V
Page 18
11
x
Part Number: 45051581